| 规格 | SPECIFICATION | 单位 | AF700-II |
| 国际标准型号 | international size rating | UNIT | 6264/700 |
| 射胶系统 INJECTION UNIT | A | B | C |
| 螺杆直径 | Screw diameter | mm | 90 | 95 | 100 |
| 螺杆长径比 | Screw L/D ratio | / | 22.3 | 21.2 | 20.1 |
| 理论注射容积 | Shot volume | cm³ | 3020 | 3365 | 3728 |
| 实际注射量 (ps) | Shot weight(ps) | g | 2748 | 3062 | 3393 |
| 注射压力 | Injection pressure | Mpa | 207 | 186 | 168 |
| 理论注射速率 (ps) | Injection rate(ps) | g/s | 526 | 586 | 649 |
| 螺杆行程 | Screw stroke | mm | 475 |
| 螺杆转速 | Screw speed(stepless) | rpm | 0~130 |
| 锁模系统 CLAMPING UNIT |
| 锁模力 | Clamping force | KN | 7000 |
| 开模行程 | Opening stroke | mm | 930 |
| 模板尺寸 (宽 x 高) | Platen size (WxH) | mmxmm | 1350x1320 |
| 拉杆间距 (宽 x 高) | Space between tie bars (WxH) | mmxmm | 930x900 |
| 模板最大距离 | Max.daylight | mm | 1880 |
| 容模量最薄～最厚 | Mold thickness(min.-max.) | mm | 380-950 |
| 顶出行程 | Hydraulic ejection stroke | mm | 280 |
| 顶出力 | Hydraulic ejection force | KN | 180 |
| 其它 OTHERS |
| 液压系统压力 | Hydraulic system pressure | Mpa | 16 |
| 油泵电机 | Pump motor | KW | 47.3+40 |
| 伺服驱动器功率 | Servo Drive Power | KW | 45+37 |
| 电热量 | Heating capacity | KW | 48 |
| 油箱容积 | Oil tank capacity | L | 700 |
| 外形尺寸 (LxWxH) | Machine dimensions(LxWxH) | mmxmm | 10.1x2.1x2.8 |
| 理论机重 | Machine weight | ton | 31 |
CN
