| 规格 | SPECIFICATION | 单位 | AF260-II |
| 国际标准型号 | international size rating | UNIT | 1160/260 |
| 射胶系统 INJECTION UNIT | A | B | C |
| 螺杆直径 | Screw diameter | mm | 50 | 55 | 65 |
| 螺杆长径比 | Screw L/D ratio | / | 22 | 24.2 | 22 |
| 理论注射容积 | Shot volume | cm³ | 539 | 653 | 777 |
| 实际注射量 (ps) | Shot weight(ps) | g | 491 | 464 | 516 |
| 注射压力 | Injection pressure | Mpa | 215 | 177 | 149 |
| 理论注射速率 (ps) | Injection rate(ps) | g/s | 225 | 273 | 324 |
| 螺杆行程 | Screw stroke | mm | 275 |
| 螺杆转速 | Screw speed(stepless) | rpm | 0~230 |
| 锁模系统 CLAMPING UNIT |
| 锁模力 | Clamping force | KN | 2600 |
| 开模行程 | Opening stroke | mm | 540 |
| 模板尺寸 (宽 x 高) | Platen size (WxH) | mmxmm | 850x850 |
| 拉杆间距 (宽 x 高) | Space between tie bars (WxH) | mmxmm | 580x580 |
| 模板最大距离 | Max.daylight | mm | 1140 |
| 容模量最薄～最厚 | Mold thickness(min.-max.) | mm | 200-600 |
| 顶出行程 | Hydraulic ejection stroke | mm | 170 |
| 顶出力 | Hydraulic ejection force | KN | 70 |
| 其它 OTHERS |
| 液压系统压力 | Hydraulic system pressure | Mpa | 16 |
| 油泵电机 | Pump motor | KW | 40 |
| 伺服驱动器功率 | Servo Drive Power | KW | 37 |
| 电热量 | Heating capacity | KW | 18.4 |
| 油箱容积 | Oil tank capacity | L | 300 |
| 外形尺寸 (LxWxH) | Machine dimensions(LxWxH) | mmxmm | 6.2x1.52x2.2 |
| 理论机重 | Machine weight | ton | 9 |
CN
