| 规格 | SPECIFICATION | 单位 | AF330-II |
| 国际标准型号 | international size rating | UNIT | 1990/330 |
| 射胶系统 INJECTION UNIT | A | B | C |
| 螺杆直径 | Screw diameter | mm | 65 | 70 | 75 |
| 螺杆长径比 | Screw L/D ratio | / | 20 | 19.6 | 23.2 |
| 理论注射容积 | Shot volume | cm³ | 1094 | 1269 | 1457 |
| 实际注射量 (ps) | Shot weight(ps) | g | 996 | 1155 | 1326 |
| 注射压力 | Injection pressure | Mpa | 181 | 156 | 136 |
| 理论注射速率 (ps) | Injection rate(ps) | g/s | 333 | 386 | 444 |
| 螺杆行程 | Screw stroke | mm | 330 |
| 螺杆转速 | Screw speed(stepless) | rpm | 0~185 |
| 锁模系统 CLAMPING UNIT |
| 锁模力 | Clamping force | KN | 3300 |
| 开模行程 | Opening stroke | mm | 650 |
| 模板尺寸 (宽 x 高) | Platen size (WxH) | mmxmm | 980x980 |
| 拉杆间距 (宽 x 高) | Space between tie bars (WxH) | mmxmm | 680x680 |
| 模板最大距离 | Max.daylight | mm | 1330 |
| 容模量最薄～最厚 | Mold thickness(min.-max.) | mm | 220-680 |
| 顶出行程 | Hydraulic ejection stroke | mm | 190 |
| 顶出力 | Hydraulic ejection force | KN | 90 |
| 其它 OTHERS |
| 液压系统压力 | Hydraulic system pressure | Mpa | 16 |
| 油泵电机 | Pump motor | KW | 47.3 |
| 伺服驱动器功率 | Servo Drive Power | KW | 45 |
| 电热量 | Heating capacity | KW | 26.4 |
| 油箱容积 | Oil tank capacity | L | 400 |
| 外形尺寸 (LxWxH) | Machine dimensions(LxWxH) | mmxmm | 7.2x1.66x2.3 |
| 理论机重 | Machine weight | ton | 13 |
CN
