| 规格 | SPECIFICATION | 单位 | AF500-II |
| 国际标准型号 | international size rating | UNIT | 3936/500 |
| 射胶系统 INJECTION UNIT | A | B | C |
| 螺杆直径 | Screw diameter | mm | 80 | 85 | 90 |
| 螺杆长径比 | Screw L/D ratio | / | 21.9 | 20.6 | 23.3 |
| 理论注射容积 | Shot volume | cm³ | 2135 | 2410 | 2702 |
| 实际注射量 (ps) | Shot weight(ps) | g | 1943 | 2193 | 2459 |
| 注射压力 | Injection pressure | Mpa | 184 | 163 | 145 |
| 理论注射速率 (ps) | Injection rate(ps) | g/s | 473 | 534 | 599 |
| 螺杆行程 | Screw stroke | mm | 425 |
| 螺杆转速 | Screw speed(stepless) | rpm | 0~160 |
| 锁模系统 CLAMPING UNIT |
| 锁模力 | Clamping force | KN | 5000 |
| 开模行程 | Opening stroke | mm | 780 |
| 模板尺寸 (宽 x 高) | Platen size (WxH) | mmxmm | 1190x1160 |
| 拉杆间距 (宽 x 高) | Space between tie bars (WxH) | mmxmm | 830x800 |
| 模板最大距离 | Max.daylight | mm | 1590 |
| 容模量最薄～最厚 | Mold thickness(min.-max.) | mm | 300-810 |
| 顶出行程 | Hydraulic ejection stroke | mm | 230 |
| 顶出力 | Hydraulic ejection force | KN | 138 |
| 其它 OTHERS |
| 液压系统压力 | Hydraulic system pressure | Mpa | 16 |
| 油泵电机 | Pump motor | KW | 40+30 |
| 伺服驱动器功率 | Servo Drive Power | KW | 37+30 |
| 电热量 | Heating capacity | KW | 38.5 |
| 油箱容积 | Oil tank capacity | L | 600 |
| 外形尺寸 (LxWxH) | Machine dimensions(LxWxH) | mmxmm | 8.5x1.95x2.5 |
| 理论机重 | Machine weight | ton | 20 |
CN
