| 规格 | SPECIFICATION | 单位 | AF800-II |
| 国际标准型号 | international size rating | UNIT | 7580/800 |
| 射胶系统 INJECTION UNIT | A | B | C |
| 螺杆直径 | Screw diameter | mm | 90 | 100 | 110 |
| 螺杆长径比 | Screw L/D ratio | / | 24 | 21.6 | 19.6 |
| 理论注射容积 | Shot volume | cm³ | 3179 | 3925 | 4749 |
| 实际注射量 (ps) | Shot weight(ps) | g | 2893 | 3571 | 4321 |
| 注射压力 | Injection pressure | Mpa | 238 | 193 | 159 |
| 理论注射速率 (ps) | Injection rate(ps) | g/s | 508 | 627 | 759 |
| 螺杆行程 | Screw stroke | mm | 500 |
| 螺杆转速 | Screw speed(stepless) | rpm | 0~130 |
| 锁模系统 CLAMPING UNIT |
| 锁模力 | Clamping force | KN | 8000 |
| 开模行程 | Opening stroke | mm | 1050 |
| 模板尺寸 (宽 x 高) | Platen size (WxH) | mmxmm | 1480x1480 |
| 拉杆间距 (宽 x 高) | Space between tie bars (WxH) | mmxmm | 1010x1010 |
| 模板最大距离 | Max.daylight | mm | 2050 |
| 容模量最薄～最厚 | Mold thickness(min.-max.) | mm | 400-1000 |
| 顶出行程 | Hydraulic ejection stroke | mm | 300 |
| 顶出力 | Hydraulic ejection force | KN | 246 |
| 其它 OTHERS |
| 液压系统压力 | Hydraulic system pressure | Mpa | 16 |
| 油泵电机 | Pump motor | KW | 47.3+47.3 |
| 伺服驱动器功率 | Servo Drive Power | KW | 45+45 |
| 电热量 | Heating capacity | KW | 52 |
| 油箱容积 | Oil tank capacity | L | 950 |
| 外形尺寸 (LxWxH) | Machine dimensions(LxWxH) | mmxmm | 10.5x2.4x3.0 |
| 理论机重 | Machine weight | ton | 42 |
CN
