| 规格 | SPECIFICATION | 单位 | AY150 |
| 国际标准型号 | international size rating | UNIT | 480/150 |
| 射胶系统 INJECTION UNIT | A | B | C |
| 螺杆直径 | Screw diameter | mm | 38 | 42 | 45 |
| 螺杆长径比 | Screw L/D ratio | / | 22.4 | 20.2 | 18.9 |
| 理论注射容积 | Shot volume | cm³ | 238 | 290 | 333 |
| 实际注射量 (ps) | Shot weight(ps) | g | 216 | 264 | 303 |
| 注射压力 | Injection pressure | Mpa | 232 | 190 | 165 |
| 理论注射速率 (ps) | Injection rate(ps) | g/s | 114 | 139 | 159 |
| 螺杆行程 | Screw stroke | mm | 210 |
| 螺杆转速 | Screw speed(stepless) | rpm | 0~230 |
| 锁模系统 CLAMPING UNIT |
| 锁模力 | Clamping force | KN | 1500 |
| 开模行程 | Opening stroke | mm | 400 |
| 模板尺寸 (宽 x 高) | Platen size (WxH) | mmxmm | 710X650 |
| 拉杆间距 (宽 x 高) | Space between tie bars (WxH) | mmxmm | 470X420 |
| 模板最大距离 | Max.daylight | mm | 870 |
| 容模量 (最薄～最厚) | Mold thickness(min.-max.) | mm | 180-470 |
| 顶出行程 | Hydraulic ejection stroke | mm | 130 |
| 顶出力 | Hydraulic ejection force | KN | 41 |
| 其它 OTHERS |
| 液压系统压力 | Hydraulic system pressure | Mpa | 17.5 |
| 油泵电机 | Pump motor | KW | 25 |
| 伺服驱动器功率 | Servo Drive Power | KW | 18.5 |
| 电热量 | Heating capacity | KW | 10 |
| 油箱容积 | Oil tank capacity | L | 200 |
| 外形尺寸 (LxWxH) | Machine dimensions(LxWxH) | mmxmm | 4.6x1.35x1.9 |
| 理论机重 | Machine weight | ton | 5.1 |
CN
