| 规格 | SPECIFICATION | 单位 | AY350 |
| 国际标准型号 | international size rating | UNIT | 2400/350 |
| 射胶系统 INJECTION UNIT | A | B | C |
| 螺杆直径 | Screw diameter | mm | 65 | 70 | 75 |
| 螺杆长径比 | Screw L/D ratio | / | 22.6 | 21 | 19.6 |
| 理论注射容积 | Shot volume | cm³ | 1166 | 1346 | 1545 |
| 实际注射量 (ps) | Shot weight(ps) | g | 1056 | 1225 | 1406 |
| 注射压力 | Injection pressure | Mpa | 207 | 178 | 155 |
| 理论注射速率 (ps) | Injection rate(ps) | g/s | 320 | 371 | 426 |
| 螺杆行程 | Screw stroke | mm | 350 |
| 螺杆转速 | Screw speed(stepless) | rpm | 0~185 |
| 锁模系统 CLAMPING UNIT |
| 锁模力 | Clamping force | KN | 3500 |
| 开模行程 | Opening stroke | mm | 670 |
| 模板尺寸 (宽 x 高) | Platen size (WxH) | mmxmm | 1070X1020 |
| 拉杆间距 (宽 x 高) | Space between tie bars (WxH) | mmxmm | 730X680 |
| 模板最大距离 | Max.daylight | mm | 1370 |
| 容模量 (最薄～最厚) | Mold thickness(min.-max.) | mm | 280-700 |
| 顶出行程 | Hydraulic ejection stroke | mm | 190 |
| 顶出力 | Hydraulic ejection force | KN | 88 |
| 其它 OTHERS |
| 液压系统压力 | Hydraulic system pressure | Mpa | 17.5 |
| 油泵电机 | Pump motor | KW | 55.8 |
| 伺服驱动器功率 | Servo Drive Power | KW | 45 |
| 电热量 | Heating capacity | KW | 23.5 |
| 油箱容积 | Oil tank capacity | L | 480 |
| 外形尺寸 (LxWxH) | Machine dimensions(LxWxH) | mmxmm | 7.0x1.7x2.3 |
| 理论机重 | Machine weight | ton | 13.5 |
CN
