| 规格 | SPECIFICATION | 单位 | AF2000-II |
| 国际标准型号 | international size rating | UNIT | 15200/2000 |
| 射胶系统 INJECTION UNIT | A | B | C |
| 螺杆直径 | Screw diameter | mm | 130 | 140 | 150 |
| 螺杆长径比 | Screw L/D ratio | / | 23.6 | 22.7 | 20.5 |
| 理论注射容积 | Shot volume | cm³ | 9287 | 12236 | 15539 |
| 实际注射量 (ps) | Shot weight(ps) | g | 8450 | 9800 | 11251 |
| 注射压力 | Injection pressure | Mpa | 164 | 141 | 123 |
| 理论注射速率 (ps) | Injection rate(ps) | g/s | 1313 | 1523 | 1749 |
| 螺杆行程 | Screw stroke | mm | 700 |
| 螺杆转速 | Screw speed(stepless) | rpm | 0~90 |
| 锁模系统 CLAMPING UNIT |
| 锁模力 | Clamping force | KN | 20000 |
| 开模行程 | Opening stroke | mm | 1650 |
| 模板尺寸 (宽 x 高) | Platen size (WxH) | mmxmm | 2410x2280 |
| 拉杆间距 (宽 x 高) | Space between tie bars (WxH) | mmxmm | 1650x1500 |
| 模板最大距离 | Max.daylight | mm | 3220 |
| 容模量最薄～最厚 | Mold thickness(min.-max.) | mm | 770-1570 |
| 顶出行程 | Hydraulic ejection stroke | mm | 400 |
| 顶出力 | Hydraulic ejection force | KN | 430 |
| 其它 OTHERS |
| 液压系统压力 | Hydraulic system pressure | Mpa | 16 |
| 油泵电机 | Pump motor | KW | 55.8+55.8+47.3 |
| 伺服驱动器功率 | Servo Drive Power | KW | 55+55+45 |
| 电热量 | Heating capacity | KW | 94.5 |
| 油箱容积 | Oil tank capacity | L | 1900 |
| 外形尺寸 (LxWxH) | Machine dimensions(LxWxH) | mmxmm | 14.8x3.6x4.3 |
| 理论机重 | Machine weight | ton | 128 |
CN
