| 规格 | SPECIFICATION | 单位 | AF2200-II |
| 国际标准型号 | international size rating | UNIT | 18800/2200 |
| 射胶系统 INJECTION UNIT | A | B | C |
| 螺杆直径 | Screw diameter | mm | 140 | 150 | 160 |
| 螺杆长径比 | Screw L/D ratio | / | 23.6 | 22 | 20.6 |
| 理论注射容积 | Shot volume | cm³ | 12246 | 15072 | 17081 |
| 实际注射量 (ps) | Shot weight(ps) | g | 10500 | 12054 | 13715 |
| 注射压力 | Injection pressure | Mpa | 163 | 142 | 125 |
| 理论注射速率 (ps) | Injection rate(ps) | g/s | 1426 | 1637 | 1862 |
| 螺杆行程 | Screw stroke | mm | 750 |
| 螺杆转速 | Screw speed(stepless) | rpm | 0~85 |
| 锁模系统 CLAMPING UNIT |
| 锁模力 | Clamping force | KN | 22000 |
| 开模行程 | Opening stroke | mm | 1800 |
| 模板尺寸 (宽 x 高) | Platen size (WxH) | mmxmm | 2440x2480 |
| 拉杆间距 (宽 x 高) | Space between tie bars (WxH) | mmxmm | 1750x1600 |
| 模板最大距离 | Max.daylight | mm | 3510 |
| 容模量最薄～最厚 | Mold thickness(min.-max.) | mm | 770-1710 |
| 顶出行程 | Hydraulic ejection stroke | mm | 400 |
| 顶出力 | Hydraulic ejection force | KN | 430 |
| 其它 OTHERS |
| 液压系统压力 | Hydraulic system pressure | Mpa | 16 |
| 油泵电机 | Pump motor | KW | 55.8+55.8+55.8 |
| 伺服驱动器功率 | Servo Drive Power | KW | 55+55+55 |
| 电热量 | Heating capacity | KW | 110 |
| 油箱容积 | Oil tank capacity | L | 2100 |
| 外形尺寸 (LxWxH) | Machine dimensions(LxWxH) | mmxmm | 15.5x3.7x4.2 |
| 理论机重 | Machine weight | ton | 148 |
CN
