| 规格 | SPECIFICATION | 单位 | AF600-PET |
| 国际标准型号 | international size rating | UNIT | 4556/600 | 4556/600 | 6264/600 | 6264/600 | 7580/600 |
| 射胶系统 INJECTION UNIT |
| 螺杆直径 | Screw diameter | mm | 95 | 100 | 105 | 110 | 120 |
| 螺杆长径比 | Screw L/D ratio | / | 25 | 25 | 25 | 25 | 25 |
| 理论注射容积 | Shot volume | cm³ | 3188 | 3532 | 4111 | 4512 | 5652 |
| 实际注射量 (PET) | Shot weight(PET) | g | 3730 | 4133 | 4890 | 5279 | 6613 |
| 注射压力 | Injection pressure | Mpa | 143 | 129 | 152 | 139 | 134 |
| 理论注射速率 (PET) | Injection rate(PET) | g/s | 873 | 1088 | 1023 | 1280 | 1488 |
| 螺杆行程 | Screw stroke | mm | 450 | 450 | 475 | 475 | 500 |
| 螺杆转速 | Screw speed | rpm | 0～110 | 0～95 | 0～87 | 0～90 | 0～85 |
| 锁模系统 CLAMPING UNIT |
| 锁模力 | Clamping force | KN | 6000 |
| 开模行程 | Opening stroke | mm | 850 |
| 模板尺寸 (宽 x 高) | Platen size (WxH) | mmxmm | 1270x1240 |
| 拉杆间距 (宽 x 高) | Space between tie bars (WxH) | mmxmm | 875x845 |
| 模板最大距离 | Max.daylight | mm | 1730 |
| 容模量 (最薄～最厚) | Mold thickness(min.-max.) | mm | 350-880 |
| 顶出行程 | Hydraulic ejection stroke | mm | 260 |
| 顶出力 | Hydraulic ejection force | KN | 212 |
| 其它 OTHERS |
| 液压系统压力 | Hydraulic system pressure | Mpa | 16 | 16 | 16 | 16 | 16 |
| 油泵电机 | Pump motor | KW | 40+40 | 47.3+40 | 47.3+47.3 | 55.8+47.3 | 55.8+55.8 |
| 伺服驱动器功率 | Servo Drive Power | KW | 37+37 | 45+37 | 45+47.3 | 55+45 | 55+55 |
| 电热量 | Heating capacity | KW | 52 | 55 | 62 | 66 | 72 |
| 油箱容积 | Oil tank capacity | L | 800 | 800 | 900 | 900 | 1000 |
| 外形尺寸 (LxWxH) | Machine dimensions(LxWxH) | mmxmm | 9.3x2.0x2.6 | 9.3x2.0x2.6 | 9.5x2.0x2.6 | 9.6x2.0x2.6 | 9.8x2.0x2.8 |
| 理论机重 | Machine weight | ton | 27 | 27 | 27.5 | 28 | 29 |
CN
