| 规格 | SPECIFICATION | 单位 | AF400-PET |
| 国际标准型号 | international size rating | UNIT | 3290/400 |
| 射胶系统 INJECTION UNIT |
| 螺杆直径 | Screw diameter | mm | 75 | 80 |
| 螺杆长径比 | Screw L/D ratio | / | 25 | 25 |
| 理论注射容积 | Shot volume | cm³ | 1766 | 2010 |
| 实际注射量 (PET) | Shot weight(PET) | g | 2066 | 2150 |
| 注射压力 | Injection pressure | Mpa | 186 | 164 |
| 理论注射速率 (PET) | Injection rate(PET) | g/s | 535 | 715 |
| 理论注射速度 | Injection speed | | 122 | 122 |
| 螺杆行程 | Screw stroke | mm | 400 | 400 |
| 螺杆转速 | Screw speed | rpm | 0～170 | 0～130 |
| 锁模系统 CLAMPING UNIT |
| 锁模力 | Clamping force | KN | 4000 |
| 开模行程 | Opening stroke | mm | 720 |
| 模板尺寸 (宽 x 高) | Platen size (WxH) | mmxmm | 1060×1060 |
| 拉杆间距 (宽 x 高) | Space between tie bars (WxH) | mmxmm | 730×730 |
| 模板最大距离 | Max.daylight | mm | 1470 |
| 容模量 (最薄～最厚) | Mold thickness(min.-max.) | mm | 250-750 |
| 顶出行程 | Hydraulic ejection stroke | mm | 210 |
| 顶出力 | Hydraulic ejection force | KN | 180 |
| 其它 OTHERS |
| 液压系统压力 | Hydraulic system pressure | Mpa | 16 | 16 |
| 油泵电机 | Pump motor | KW | 74 | 74 |
| 伺服驱动器功率 | Servo Drive Power | KW | 75 | 75 |
| 电热量 | Heating capacity | KW | 35 | 36.8 |
| 油箱容积 | Oil tank capacity | L | 600 | 600 |
| 外形尺寸 (LxWxH) | Machine dimensions(LxWxH) | mmxmm | 7.8x1.7x2.3 | 7.8x1.7x2.3 |
| 理论机重 | Machine weight | ton | 16.5 | 16.6 |
CN
