| 规格 | SPECIFICATION | 单位 | AF2500-II |
| 国际标准型号 | international size rating | UNIT | 31100/2500 |
| 射胶系统 INJECTION UNIT | A | B | C |
| 螺杆直径 | Screw diameter | mm | 160 | 170 | 180 |
| 螺杆长径比 | Screw L/D ratio | / | 22.4 | 21.8 | 19.8 |
| 理论注射容积 | Shot volume | cm³ | 17208 | 21618 | 29884 |
| 实际注射量 (ps) | Shot weight(ps) | g | 15541 | 17548 | 19673 |
| 注射压力 | Injection pressure | Mpa | 182 | 161 | 144 |
| 理论注射速率 (ps) | Injection rate(ps) | g/s | 1517 | 1713 | 1920 |
| 螺杆行程 | Screw stroke | mm | 850 |
| 螺杆转速 | Screw speed(stepless) | rpm | 0~80 |
| 锁模系统 CLAMPING UNIT |
| 锁模力 | Clamping force | KN | 25000 |
| 开模行程 | Opening stroke | mm | 1900 |
| 模板尺寸 (宽 x 高) | Platen size (WxH) | mmxmm | 2700x2550 |
| 拉杆间距 (宽 x 高) | Space between tie bars (WxH) | mmxmm | 1800x1720 |
| 模板最大距离 | Max.daylight | mm | 3700 |
| 容模量最薄～最厚 | Mold thickness(min.-max.) | mm | 800-1800 |
| 顶出行程 | Hydraulic ejection stroke | mm | 450 |
| 顶出力 | Hydraulic ejection force | KN | 430 |
| 其它 OTHERS |
| 液压系统压力 | Hydraulic system pressure | Mpa | 16 |
| 油泵电机 | Pump motor | KW | 55.8+55.8+47.3+47.3 |
| 伺服驱动器功率 | Servo Drive Power | KW | 55+55+45+45 |
| 电热量 | Heating capacity | KW | 155 |
| 油箱容积 | Oil tank capacity | L | 2300 |
| 外形尺寸 (LxWxH) | Machine dimensions(LxWxH) | mmxmm | 17x3.9x5.1 |
| 理论机重 | Machine weight | ton | 175 |
CN
